Please Provide the Following Key Parameters of Your Original Motor for Accurate Matching
The following are the core parameters of the original motor, which directly affect motor compatibility and adaptability. Please carefully check your original motor and provide accurate information, and we’ll quickly recommend a suitable motor model for you.
1. Original Motor Brand
Please provide the specific brand of the original motor. Brand consistency is the basis for ensuring compatibility, and we will prioritize recommending motors of the same brand or compatible with this brand.
2. Original Motor Wattage
Please provide the wattage of the original motor(e.g., 2800W, 3000W, 4000W, 5000W, 7500W etc.).
3. Original Motor Magnet Height (Mag Height)
Please provide the magnet height specification of the original motor (e.g., 40h, 45h, 50h, 60h etc.). Magnet height affects motor torque and battery life. Matching the magnet height ensures that the riding experience is consistent with the original vehicle.
4. Original Motor Tire Size
Please provide the specific size of the tire matching the original motor (e.g., 11 inches, 13inches, 14inches, 125/60-7, etc.). The tire size needs to be completely compatible with the scooter frame and fork to avoid installation difficulties.
5. Original Motor Tire Type
Please indicate the type of the original motor tire (road tire or off-road tire). We will recommend the same type or a suitable tire according to your riding scenario to ensure a good riding experience.
6. Whether the Original Motor Has a Hall Sensor
Please confirm whether the original motor is equipped with a Hall sensor (most modern brushless motors are). This is the key to normal communication between the motor and the controller, and we will match a motor with the corresponding sensor.
7. Original Motor Connector Type
Please take a photo of the original motor connector. The connector needs to be completely compatible with the controller to avoid connection failure.
8. Original Motor Wire Length
Please measure the length of the original motor wire (from the motor to the connector). The wire length needs to be suitable for the scooter wiring to avoid being too short to connect or too long to cause safety hazards.
9. Whether the Original Motor Wire and Disc Brake Are on the Same Side
Please confirm whether the wire and disc brake of the original motor are on the same side or opposite sides. This position directly affects installation, and we will recommend a motor with the same position.
10. Lead-Out Side of the Original Motor Wire (Left/Right)
Please confirm whether the original motor wire is led out from the left or right side of the motor. The lead-out side of the wire needs to match the scooter frame wiring to avoid wire entanglement and damage during installation.
11. Installation Side of the Original Motor Disc Brake (Left/Right)
Please confirm whether the disc brake (brake disc) of the original motor is installed on the left or right side. The disc brake position needs to be aligned with the scooter brake caliper to ensure normal use of the brake.
12. Height of the Motor Cover on the Disc Brake Side of the Original Motor
Please measure the height of the motor cover on the disc brake side of the original motor (from the wheel axle to the top of the motor cover). The height of the motor cover needs to match the brake caliper to avoid brake interference.
Parameter Provision Method and Matching Service Description
-
You can provide all the above parameters by taking photos (the whole original motor, connector, parameter marks) plus text description to ensure accurate information.
-
After receiving your parameters, we will verify them in the shortest time and recommend 1-2 fully compatible motors for you, clearly informing you of the compatibility and adaptation advantages.
-
Whether you are repairing a faulty motor or upgrading the motor to improve performance, our matching service can help you avoid selection mistakes and ensure the motor works normally after installation.
Conclusion
When replacing an electric scooter motor, you don’t need to research complex parameters or worry about incompatibility. As long as you provide the above 12 key parameters of your original motor, we will fully and accurately match a suitable motor for you, saving you the trouble of selection, preventing buying the wrong parts, and making motor replacement more convenient and efficient.
Provide the original motor parameters as soon as possible, and we will recommend a suitable motor for you immediately to get your scooter back to normal riding quickly!